375-WES Large Outdoor Figural Sconce
This Empire-style, neat architectural Entry sconce is cast from brass/bronze material. It is normally supplied with the antique finish as shown and the detail for these castings, meant for outside, is pretty good. They do vary a bit as all castings will.
We have wired the sconce with an added water protection fitter which helps channel rainwater away. These fine heavy sconces mount with 3 lag bolts that have decorative theft deterrent caps. You can see the 3 caps, that go over the lag bolts, on the back plate. There are three of them.
These sconces are big and heavy and get bigger and heavier with the shades that are chosen to go with them. Two of these options use a 6” fitter shade while the flame, or torch shade, uses an 8” fitter that we need to make for each light purchased.
Measurements of metal Sconce only: The backplate is 21” tall by 9” max wide before shades are added. The light protrudes 15” before shades are added.
Each added shade changes enlarges the overall measurements as follows:
With a 12” diameter ball shade, it’s height now becomes 26” with a projection of 17 1/2” and the width of the shade which is 12”. 050G is a 12” opal glass ball shade.
With a 0157G acorn Victorian glass shade, it has a final height of 27” tall by 10 1/2” wide and a 17” projection.
With the outrageously large flame shade...which is simply for folks who desire an outrageous flame shaded architectural light and have funds budgeted for it. This shade is pretty expensive and the fitter has to be changed from a 6” fitter to an 8” fitter. But ....the results are rather superb. The shade, by itself, is 17” tall with a diameter of about 10”. Using this shade, the resulting fixture becomes 30” tall by about 10” wide and projects 16”. We can coat the shade for an amber appearance if desired. Upscale change: Add $300.00 for upsized 8” fitter and monster flame shade.
Price: 375-WES Brass sconce without shade .
Standard fitter supplied is 6” for larger shades which accepts both 050G and 0157G or accepts any other 3rd party source 6” fitter shade.
