ZLW-189SP Antique Reproduction Pavia Pattern Entry Door Plate
VERY impressive! This is a reproduction of the "Pavia" pattern roaring lion doorknob backplate by P.F. Corbin, which can be seen in their Circa 1900 catalog.
This impressive exterior doorknob & cylinder backplate has a design of double full figured cherubs flanking a lion's head. It is meant to be used as an exterior door plate, with a doorknob on the bottom hole and a lock cylinder in the top hole.
Measurements:
-
Height: 18"
-
Width: 4"
-
Measurement from the center of the cylinder hole to the center of the doorknob spindle hole is 3 ¾".
-
Doorknob receiver has an 11⁄16" internal diameter.
Cast in solid brass using the lost wax method, the finish is "antiqued" and lacquered to preserve the tone.
The design is very classical Roman, which would look terrific in a French Revival, English Tudor, baroque, or Gothic style home as well.
Backplates are sold by "each".
On the interior of the door, you would use the matching door plate, which has a turnlatch on the door plate to lock the door from the inside.
You can use our antique reproduction mortise lock for this entry door plate.
Of course, we also offer the matching roaring lion doorknobs.
Other door plates in this series include:
These are our most popular doorknobs for this door plate:
We manufacture Victorian brass door knobs, French lever handles, Mission or Craftsman copper door knobs, Art Deco design door knobs, Art Nouveau door hardware, and reproduce rare R&E door hardware and rare Windsor door hardware originally produced in the 1880's.
Where else will you find a variety of Victorian screen door hardware?
For every suite of doorknobs, we also sell the matching vintage door plates, and accompanying hardware such as antique door bolts, Victorian mortise locks, electric doorbells and twist doorbells.
Whether you're performing a restoration or adding some personality to new construction, Vintage Hardware has the complete antique door hardware solution.
To see more of our vintage reproduction door knobs, click here.
The following locks are compatible with this doorplate:
Uncertain of what size lock cylinder you need for your entry door? The following table should help.
|
Door Thickness
|
Part no. / Cylinder Length
|
|
1 1/4"
|
|
|
1 1/2"
|
|
|
1 5/8"
|
|
|
1 3/4"
|
|
|
2"
|
|
|
2 1/8"
|
|
|
2 1/4"
|
|
|
2 1/2"
|
|
|
3" to 3 1/2"
|
|
We also make a cylinder with a decorative turnlatch, L-7500 = 1", L-7525 = 1 1/4", L-7550 = 1 1/2", and L-7575 = 1 3/4".
If you have a double door, or would just like the extra bolt functionality on your single entry door, we suggest using the following popular door bolts:
Click here to see more of our vintage door bolt selection.
