ZC-100SP Arts & Crafts Thumblatch Copper Entry Door Plate Pacific Pattern 21" Tall
Each of our hammered copper door plates is made from thick sheet copper, hammered hundreds of times, not cast like cheap copies. Skilled craftsmen make this door plate one at a time, a true work of art. Not just Arts & Crafts "style", but the real thing.
The thumb latch and keyhole distances are set up for our lock, which has a 2 1/2" backset. We're able to give you the choice of using this entrance plate with a door knob on one side and thumblatch on the other with our single- lift lock . For two thumb latches we have a double lift mortise lock .Both have the beautiful hammered copper face plate and strike plate.
The matching door plate for the interior is our Arts & Crafts Pacific Pattern Copper Turnlatch door plate . It allows you to operate the cylinder lock from the inside. It uses a thumblatch, so you would need the doublelift function mortise lock .
The distance from the center of the cylinder lock receiver to the thumblatch stem is 4 3/4".
3 1/2" Wide by 21" High
The following interior plates go well with this item:
Choose one of the locks below for this door plate:
These are our most popular doorknobs for this door plate:
We manufacture Victorian brass door knobs, French lever handles, Mission or craftsman copper door knobs, Art Deco design door knobs, Art Nouveau door hardware , and reproduce rare R&E door hardware and rare Windsor door hardware originally produced in the 1880's.
Where else will you find a variety of Victorian screen door hardware?
For every suite of doorknobs, we also sell the matching vintage door plates , and accompanying hardware such as antique door bolts, Victorian mortise locks, electric doorbells and twist doorbells . Whether you're performing a restoration or adding some personality to new construction, Vintage Hardware has the complete antique door hardware solution.
To see more ouf our vintage reproduction door knobs, click here
Uncertain of what size lock cylinder you need for your entry door? The following table should help.
Door Thickness | Part no. / Cylinder Length |
1 1/4" | |
1 1/2" | |
1 5/8" | |
1 3/4" | |
2" | |
2 1/8" | |
2 1/4" | |
2 1/2" | |
3" to 3 1/2" | |
We also make a cylinder with a decorative turnlatch,?L-7500?=? 1",?L-7525?= 1 1/4",?L-7550?= 1 1/2", and?L-7575?= 1 3/4".
If you have a double door, or would just like the extra bolt functionality on your single entry door, we suggest using the following popular door bolts:
