Vintage Hardware & Lighting - Victorian Iron Grille Register Vent Cover With Dampers (Choose By Size)

Solid Cast Iron Victorian pattern Grilles with Damper

Sizes are listed as the boot (hole) size first, then the overall size of the register.

ZM-IR-211 2 ¼" x 10" (Overall 3 ½" x 12") Cast Iron Grill with Damper
ZM-IR-213 2 ¼" x 12" (Overall 3 ½" x 14") Cast Iron Grill with Damper
ZM-IR-215 2 ¼" x 14" (Overall 3 ½" x 16") Cast Iron Grill with Damper

ZM-IR-409 4" x 8" (Overall 5 ½" x 10") Cast Iron Grill with Damper
ZM-IR-411 4" x 10" (Overall 5 ½" x 12") Cast Iron Grill with Damper
ZM-IR-413 4" x 12" (Overall 5 ½" x 14") Cast Iron Grill with Damper
ZM-IR-415 4" x 14" (Overall 5 ½" x 16") Cast Iron Grill with Damper

ZM-IR-611 6" x 10" (Overall 8" x 12") Cast Iron Grill with Damper
ZM-IR-613 6" x 12" (Overall 8" x 14") Cast Iron Grill with Damper
ZM-IR-615 6" x 14" (Overall 8" x 16") Cast Iron Grill with Damper
ZM-IR-623 6" x 22" (Overall 8" x 24") Cast Iron Grill with Damper
ZM-IR-631 6" x 30" (Overall 8" x 32") Cast Iron Grill with Damper

ZM-IR-809 8" x 8" (Overall 10" x 10") Cast Iron Grill with Damper
ZM-IR-811 8" x 10" (Overall 10" x 12") Cast Iron Grill with Damper
ZM-IR-813 8" x 12" (Overall 10" x 14") Cast Iron Grill with Damper
ZM-IR-815 8" x 14" (Overall 10" x 16") Cast Iron Grill with Damper

ZM-IR-1011 9 ¾" x 9 ¾" (Overall 11 ¾" x 11 ¾") Cast Iron Grill with Damper
ZM-IR-1015 10" x 14" (Overall 12" x 16") Cast Iron Grill with Damper

These are heavy solid black cast iron Wall, Ceiling, or Floor registers produced in the Victorian style.

Since these are all heavy cast grates, their thickness varies between ¼" on the rim to ½" in the center design area. Due to casting and finishing, this varies somewhat. You may need to modify for different mounting applications.

From time to time, we have been asked to make special sizes. We can do this for you if you have an original antique sample that we can cast from.

Included with these registers are dampers, which give the ability to control the flow of air coming out of these registers. If you do not require a damper, please click here to see our iron registers that do not have dampers: ZM-IronRectNo.

These dampers are available in various sizes. Please select which size you want from our options menu on the left hand side.

All grilles have been pre-drilled with countersink holes. If the mounting holes are not needed for your project, please leave us a note at the "Special Instructions" prompt during checkout. Grilles without the mounting holes can be provided by special order. This may result in a longer processing time for your order.