Z500MKKSET Lost Wax R&E Interior Locking Mortise Door Set - Choice of Doorknobs
Russell and Erwin design tall and narrow back plate, which is featured in Catalog VII, dated 1887. The swinging keyhole cover has an image of a fierce feline.
This complete door set is hand-finished in our Antique Brass Finish.
This interior mortise passage set locks from both sides using a skeleton key.
The Complete Set Includes:
-
Two Door Plates with Doorknob & Keyhole Function
-
Two Doorknobs with the Connecting Spindle
-
One Mortise Lock with 2 Skeleton Keys (choice of 2 ¼" or 2 5⁄8" backset)
Measurements:
-
Door Plates: 1 5⁄8" wide x 8 3⁄8" tall.
-
Mortise Locks:
-
2 ¼" Backset Lock:
-
Lock Body: 3 ¾" tall x 2 7⁄8" deep x 5⁄8" thick.
-
Faceplate: 1" wide x 6" tall; 3⁄16" thick.
-
Strike Plate: 4 ½" tall x 1" wide (plus tongue).
-
Distance from the center of the doorknob receiver to the center of the round keyhole bit is 2 ¼".
-
2 5⁄8" Backset Lock:
-
Lock Body: 3 ¾" tall x 3 3⁄16" deep, and 5⁄8" thick.
-
Faceplate: 1" wide x 6" tall; 3⁄16" thick.
-
Strike Plate: 4 ½" tall x 1" wide (plus tongue).
-
Distance from the center of the doorknob receiver to the center of the round keyhole bit is 2 ¼".
Mounting screws for the hardware are included with each set.
SET1: 2 1⁄8" diameter; 2" projection.
SET2: 2 3⁄8" diameter; 2" projection.
SET3: 2 1⁄8" diameter; 1 7⁄8" projection.
SET4: 2 3⁄8" diameter; 2 1⁄8" projection.
SET5: 2 3⁄8" diameter; 2 1⁄8" projection.
SET6: 2 ¼" diameter; 2" projection.
SET7: 2 ¼" diameter; 2 1⁄8" projection.
SET8: 2 3⁄8" diameter; 2" projection.
SET9: 2 ¼" diameter; 1 7⁄8" projection.
SET10: 2 ¼" diameter; 2" projection.
SET11: 2 7⁄8" diameter; 3" projection (this is one Impressive LARGE KNOB!).
SET12: 2 3⁄8" diameter; 2 ¾" projection.
