45G-E26B  Standard Size Base, Round LED Bulb Non-Dimmable

Light from these bulbs is a gentle warm incandescent look in the 2700K spectrum.

1.6 watts to operate the LED bulb, yielding the equivalent of a 25 watt incandescent bulb. Approx 2700 Kelvin.

For special base sizes, such as European E-14 or E-27, please call to order at 360-379-9030.

L.E.D. light bulbs are like mini computers. Whether you are using LEDs in a lamp, wall sconce, or ceiling light, the procedure is the same. To keep your investment in LEDs "Healthy", you should always first make sure your sockets are in good condition. Always unplug your fixture before checking or adjusting it.

 TURNING IT OFF IS NOT ENOUGH, YOU MUST UNPLUG THE FIXTURE.

There is a small tab in the bottom center of the socket.  After a while, it may become broken or flattened due to screwing in a light bulb with too much force.  This can cause arcing between the bulb and socket.  This occurs when light bulbs are screwed down into the sockets too tightly, which is a common problem. LEDs  (acting like mini-computers) don't like arcing, this will shorten the life of any LED bulb.

If the tab area is blackened or pitted, it is arcing. 

Light bulbs are not all made equally.  Different manufacturers have different levels of contacts for each bulb.

If the tab is broken or blackened, we advise a new socket prior to installing the LED bulb. 

Check to see if the center contact is flattened down inside the socket and might not make good contact with the bottom of the light bulb. 

Gently lift the center contact up carefully so that it will definitely make contact with the bottom of the light bulb. 

Plug the lamp into the wall outlet, gently thread-in the light bulb and turn the lamp on.

PLEASE NOTE: All light bulbs and tubes, sockets and switches sales are Final.