ZB-10SP Antique Brass Finish Reproduction Windsor Exterior Entry Thumblatch Door Plate 15 3/4" Tall
ZB-OB10SP Oil Rubbed Bronze Finish Windsor Thumblatch Door Plate 15 3/4" Tall
Cast in lost wax process using solid brass, darkened to look like an original patina with our antique brass finish.
Measurement from the center of the cylinder hole to the thumblatch bolt is 4 3/4".
Windsor was designed by the Reading Hardware Co, circa 1885.
For a full mortise lock with thumblatch function in the Windsor pattern, the ZB-9SP is also available. This is a door plate that can be used with our single thumblatch mortise lock and have a doorknob inside. If you want a thumblatch inside and outside of your entry door, select our double thumblatch mortise lock for the double latch. Select the antique brass finish for your mortise lock, to match the Windsor line.
Overall Measurements: 2 1/2" wide by 15 3/4" high. Distance from center of cylinder hole to top of door plate is 2 15/16".
Matches our large handle only door plate for double doors, and thumblatch interior door plate. Pictured here also are additions for your entry, either an electric doorbell, or the earlier mechanical Windsor doorbell lever and Windsor bell.
If you have a door that doesn't need the full mortise latch, see our Windsor security bolt, sold separately.
The following interior plates go well with this item:
Choose one of the locks below for this door plate:
Uncertain of what size lock cylinder you need for your entry door? The following table should help.
|
Door Thickness
|
Part no. / Cylinder Length
|
|
1 1/4"
|
|
|
1 1/2"
|
|
|
1 5/8"
|
|
|
1 3/4"
|
|
|
2"
|
|
|
2 1/8"
|
|
|
2 1/4"
|
|
|
2 1/2"
|
|
|
3" to 3 1/2"
|
|
We also make a cylinder with a decorative turnlatch, L-7500 = 1", L-7525 = 1 1/4", L-7550 = 1 1/2", and L-7575 = 1 3/4".
If you have a double door, or would just like the extra bolt functionality on your single entry door, we suggest using the following door hardware:
|
Double Door Plates |
|
|
|
Many of our door plates have matching double door plates to work with a double door configuration. This is very useful in places where one door needs to have a locking function - and the other door only needs a knob or handle. Compliment your doors with a set of matching door plate pairs, from any of our vintage reproduction styles.
|
